Best Car Cell Phone Holders in 2022 [*Top Picks*]
Looking for the best car cell phone holders on the market? We’ve got you covered. Check out our ratings of absolute bestsellers below and make a final decision.
4550 Reviews Scanned
Phone Holder Car [Upgrade Clip Never Fall] Car Phone Holder Mount Automobile Air Vent Hands Free Cell Phone Holder for Car Fit for All Car Mount for iPhone Android Smartphone
Secure Grip & Never Fall Off: The phone mount for car is armed with an innovative hollow silicone rubber. It can hold your phone more tightly than other silicone arm clips, you can rollover your phone at will, it will not move at all
Firmly Clip: The car phone holder mount has an adjustable handle lock clasp, which can easily and firmly fix the vent mounting clip to the car vent. NOTE: THIS PHONE MOUNT ONLY CAN HOOK ON HORIZONTAL AIR VENT BUT IT CANNOT BE USED ON VERTICAL OR ROUND AIR VENT
Broad Applicability: The ultra-wide adjustable arm design will make the car phone holder suitable for all mobile phones (4.0-7.2 inches), thin cases and other devices (width between 2.55-4.11 inches), such as GPS devices
Easy to Install: Clamp the car vent phone mount on the vent and rotate the handle lock ring. The quick release button and adjustable clamp arm make it very easy to sheathe and remove your phone just with one hand
Adjustable as your wish: With the 360° rotating and rotating ball joint, the iphone holder for car can be easily adjusted to the best viewing angle. Whenever and wherever, the phone holder for car vent can secure your driving safety
Loncaster Car Phone Holder, Car Phone Mount Silicone Car Pad Mat for Various Dashboards, Slip Free Desk Phone Stand Compatible with iPhone, Samsung, Android Smartphones, GPS Devices and More, Black
Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on
Qifutan Phone Mount for Car Vent [2022 Upgraded Clip] Cell Phone Holder Car Hands Free Cradle in Vehicle Car Phone Holder Mount Fit for Smartphone, iPhone, Cell Phone Automobile Cradles Universal
Upgraded Vent Clip: The Car phone mount features a stronger, thinner vent clip and an innovative support ring for extra support, which could hold your phone securely on an air vent in your car. NOTE: THIS CAR MOUNT FOR PHONE is ONLY MATCHED WITH HORIZONTAL BLADE AIR VENTS.
Adjustable Attachment: The phone holder car features an adjustable support ring, it can be rotated to any angle without blocking the vents. The Adjustable Bottom Foot can fit all phones.
Innovative Hollow Silicone Rubber: The car mount for iPhone is armed with an innovative hollow silicone rubber, which is more stable when compared with other common silicone rubbers. When you put your phone on the car phone mount, your phone can fully fit the hollow silicone rubber cushion so that it won't drop at all.
Perfect Protection: The car vent phone mount is equipped with a thick layer of silicone which could protect your smartphone from wear and tear.
Ideal Viewing Angle: The 360° rotating and pivoting ball joint can be adjusted to any viewing angle and quickly switch between vertical and horizontal visual angles.
Cell Phone Holder for Car Phone Mount Long Arm Dashboard Windshield Car Phone Holder Strong Suction Anti-Shake Stabilizer Phone Car Holder Compatible with All Phone Android Smartphone
NOTE: ONLY USE THE EXTRA DASHBOARD PAD WHEN THE SUCTION CUP CAN NOT ATTACH ON THE SURFACE CLOSELY
NOTE: THE CAR MOUNT NEED A BIG ENOUGH FLAT SURFACE TO MAKE THE ADHESIVE ATTACHED CLOSELY AND COMPLETELY
NOTE: NOT RECOMMENDED TO USE THE EXTRA DASHBOARD PAD FOR WINDSHIELD MOUNTING
Broad Vision: Qifutan cell phone car mount features a 16cm/6.2in aluminum long gooseneck that sends your phone much closer to you. It can be mounted on the windshield firmly. Most importantly, you can bend it in every direction to avoid obstructing the view
Secure Steady Installation: Qifutan car mount for iphone 13/12/11 features an extra-strong vacuum suction cup with a layer of super sticky gel, a locking lever, and an anti-shake stabilizer. It sticks securely and easily on the windshield or most flat surfaces and removes the phone car mount without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surface is dirty or it can not stick firmly, then let it air dry.)
One-Hand Operation: Press the button on the lower back of the car mobile phone holder to take out your phone, and press the back edge of the clamping arms to secure your phone with one hand. Make your operation more fluently. Fit well for the smartphone which’s the width between 4''-7''in and the most thickness
Smooth Contact: The car phone mount is padded with multiple soft silicone pads to avoid scratching your smartphone or other devices. Perfect choice for most cars, vehicle, pickup trucks, SUVs, trucks, taxis; a good assistant for Uber, Lyft drivers
Ideal Viewing Angle: The car phone mount features a 360° rotating ball joint that allows you to switch it from portrait to landscape view quickly, for getting the best viewing angle. It is favorable for navigation and sending and receiving phone calls. You can enjoy a more convenient and secure drive
[Upgraded] TOPGO Cup Holder Phone Holder for Car, Car Cup Holder Phone Mount Universal Adjustable Gooseneck Cup Holder Cradle Car Mount for Cell Phone iPhone,Samsung,LG (Black)
UPGRADED VERSION: Do you have such a problem in the journey or the working route of driving, the phone holder arm blocked the gearshift?Have you met the base is too small to fit the cup holder?Don’t worry about it，we have achieved it.so we release this Upgraded Version immediately to solve the problem. Now you can purchase confidently.
SIMPLE TO INSTALL: Cup holder phone mount is Adjustable and fits firmly and perfectly，securely in the cup holder for car, Pretty good choice for most cars, vehicle, pickup trucks, SUVs, trucks, taxis; a helpful fellow for Uber, Lyft drivers.
ADJUSTABLE GOOSENECK: Apply aluminum alloy material into gooseneck forging,make it solidest and durable.Between the Up to 8 inch long neck, makes it easier and flexible to operate and access your mobile phone. Changing the view of gooseneck to avoid blocking the gearshift.You can adjust the height as you like, achieve maximum flexibility.
STRONG AND DURABLE: Made with an adjustable Nano silica air bag stable support shelf and thickened anti-slip rubber pads, both of this，achieving the phone holder will securely lock in your cup holder. Holder has extended arms for wider depth and longer length, 360 degree rotation for desired position vertical or horizontal mode.
SECURE GRIP & ANTI-SLIP SURFACE: The curved arm and 2 holding feet provide all-round protection for your phone. Soft sponge cushions protect the devices from damage.
UNIVERSAL CELL PHONE HOLDER: Suitable for all types of 2.01' - 3.54' wide devices, such as iPhone 13 Pro Max 12 Mini 11 Pro/SE2/XS Mas/XR/8/7 Plus/6s, Samsung galaxy S22 Ultra/S21/20/10/S9+/S8 Plus/S7 Edge/Note20/10/9, Huawei, HTC, LG, MOTO, GPS, Google Pixel, Sony, Nexus, Nikia, Oneplus, etc.
NOTE: Phone holder can not fit the phone with battery case, support maximum 0.51" thickness device,The maximum size of the Phone cradle-holders base is the diameter 4“, Please carefully compare the size of the car cup holder and the product before purchase to ensure that this product can be placed in the car cup holder.
VICSEED Car Phone Mount, [Thick Case & Big Phones Friendly] Long Arm Suction Cup Phone Holder for Car Dashboard Windshield Air Vent Hands Free Clip Cell Phone Holder Compatible with All Mobile Phones
3 in 1 Universal Car Mount: VICSEED car cell phone holder made with airliner PTFE material, can be universally mounted to your dashboard, windshield or vent to meet your demand at your convenience and requirements. Good choice to most of the cars, pickup trucks, SUV, trucks, taxis; good assistant for Uber, Lyft drivers.
Perfect Protection: Say goodbye to the easy-scratched plastic panel car mount. VICSEED Upgrade 3 in 1 mobile phone holder for car adds a high-density silicone material with excellent resilience. The car phone holder is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices.
Secure Stable Install: The VICSEED car cell phone mount features an extra strong suction cup with super sticky gel pad. It easily sticks securely on the dashboard or most flat surfaces. Remove the car vent phone mount easily by pulling the suction pad without leaving any nasty marks. (Note: use warm water to wash the car holder's suction cup if the surfaces are dirty or it can not stick well, then let it air dry.)
Long Arm Design & Multiple Viewing Angle: The car mount for iPhone 11 has a telescopic arm that extends from 4.84" - 9.05" and can pivot up or down for a variety of angles which optimizes viewing capabilities. This car holder for cell phone has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. Position your phone at the perfect angle to enjoy a more relaxed and safer drive.
One-Hand Operation: The car mobile phone holder also features a One-button release system that enables you to lock or release your phone with just one hand operation.Fit well for all mobile phones between 4''-7''in width and most thick case.
vanva [ Military-Grade Protection ] Universal Air Vent Car Mount, [ Big Phones & Thick Case Friendly ] Cell Phone Holder for Car Hands Free Clamp Cradle Vehicle Compatible with All Apple iPhone
[ vanva Ultimate Car Phone Holder ] With the latest improved vent clip [Don't Slip & Drop], this car phone holder could hold your phone firmly even on the bumpiest road or sharper turn. This phone car holder is made from the most advanced durable sturdy aviation-grade materials,it is the first phone mount car to pass most extreme test on the market, making it more resistant to abrasion and corrosion.
[ Screw the Vent Clamp Tightly & Secure Stable Install ] vanva car phone mount adopts 2021 latest screw mechanial lock design which holds your phone securely to the vent. Screw the clamp and the rubber clip hook will catch one of the car air vent blades tightly, even if you hit a bump or a sharper turn. After take few seconds to install it well, which won't distract you from driving.
[ Rotate Freely & Adjust Perfect Angle as You Like] Dual to the 360-degree swivel head, your phone can be rotated easily to landscape and poraits as well as anywhere in between, with the vanva car mount. This air vent car mount allow you secure your smartphone to the air vent firmly, keeping it in place whilst the optimal viewing angle. Easily lay and remove your phone using the widely comfortable phone cradle with instant release button.
[ Hold Your Phone Stably & Drive without Distracting ] vanva phone mount holder has anti-slip rubber pads, stable support shelf, firm & scratch-free claw offer secure grip for your cellphone to ensure safer driving. With all above these, the stability increase 5 times, even can stable support big phones and thick cases.
[ Fit Universally & Get 24 Months Worry Free Warranty ] With our car phone mount, you'll enjoy 24 months warranty. This cell phone car mount is fit for almost all phones, include iPhone 13/ 13 Pro / 13 Pro Max/ 12/12 Pro/12 Pro Max/12 Mini/SE/ 11 /11 Pro /11 Pro Max /XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / 5s / 5, Samsung Galaxy S10 / S10+ / S10e / S9 / S9+ / S8 / S8+ /Note 10+ /Note 10 / Note 9/Note 8/ S7 / S7 Edge / S6 S6 Edge / S5 / S4, LG, Google Pixel etc.
360° Rearview Mirror Phone Holder,Car Rearview Mirror Mount Phone and GPS Holder,Universal 360 Degrees Rotating Car Phone Holder,Cell Phone Automobile Cradles(Black)
Upgraded version, can be placed in the back seat, used in multiple scenarios.
Easy to install, not easy to shake off.
Adjustable Angle,Car phone holder can rotate 360° to meet the needs of different sight lines; Meanwhile, it also supports horizontal and vertical screen switching, the navigation angle can be adjusted at will, which is convenient for you to plan your route and drive better.
Suitable For Any Occasion:you Can also be installed in car seats, kitchens, bedrooms, which is convenient for you to study, work, and pass boring time.
Applicable to most mobile phones on the market.
Phone Mount for Car Dashboard,Car Phone Holder Mount,Cell Phone Holder Car Dashboard Windshield [Military-Grade Super Suction & Stable] Anti-Shake Stabilizer Car Mount for iPhone All iOS Android Phone
【FOCUS ON PERFECTION】This upgraded version of the cell phone automobile cradle is made of the airliner PTFE materia and super suction cups. Say goodbye to substandard suction cups, limited compatibility and easy-to-break clamp arms, lengthy and tedious operations, and problems that hinder driving vision. All look similar,YFYYF always chooses the best materials.
【SAFE AND STABLE】The car cell phone holder is made from new upgraded suction cups, which provide stronger grip. So it will stay in place better and is friendly to your phone on bumpy roads during emergency braking and sharp turns. The inner clip of the upgraded phone car mount adds air capsule silicone, which increases the friction by 60%.
【IDEAL VIEWING ANGLE】The car phone mount has a unique long arm that is bent downwards, which does not take up space and never obstructs the line of sight. Highly flexible 360° rotation and 145° up and down adjustment,support mobile phone vertical, horizontal using,so you can get the best view.Enjoy a more relaxed and safer driving experience.
【ONE-HAND OPERATION】 Adjust the bottom foot of the iphone holder for car dashboard mount as per the size of your phone, and put your phone in it and lock your phone perfectly by adjusting the clamping arm. Press the buttons on both sides to release your smartphone in one second. Smartphone car mount gives you an easy and safe driving journey.
【UNIVERSAL】 Super wide arm enables this cell phone car holder mount to fit for all smart phones even with thick cases. Suitable for most cars, pickup trucks, SUVs, trucks and taxis. This is a great help for Uber and Lyft drivers. If you have any dissatisfaction, please contact us for replacement or refund.
【Washable & reusable suction cup】Simply wash and dry naturally, then stick in a new place with the same strong suction power as before.
Humixx Car Phone Holder Mount [Military-Grade Super Suction & Stable] Universal Hands-Free Cell Phone Holder for Car Dashboard Windshield Air Vent Car Mount for iPhone Samsung All Smartphones & Cars
[Military-Grade Suction Test] The latest enhanced Humixx car phone holder mount has passed 1000+ suction tests, reaching military-grade effects! The car cell phone mount adopts a 2-level locking mechanism and 3-layer nano gel sucker, which is 3 times stronger than ordinary suction power! The car mount's suction cup can withstand temperatures from -20°C (-4°F) to 95°C/(203°F) and work well in extreme weather. Just rinse with water and dry to restore the adhesion of phone car holder
[4 in 1 Cell Phone Holder for Car] Are you not sure which installation method is better for your car? No worries! The 4 in 1 car phone mount can be flexible placement. Dashboard & Windshield & Air Vent & Desk, all places work perfectly. Also, with low temperatures in winter and heat in summer, you can choose to avoid the issue caused by environmental influences. Suitable for all cars like sedan, pickup trucks, suv, taxis and more
[Adjust Car Holder As You Wish] The Humixx team selects aviation material PEFT and components lab-tested to ensure sturdiness. The ball joint and arm of this mobile phone car mount are 10 x sturdier than normal ones. Adjustable 270° Telescopic Arm/360° Rotation Ball Joint for optimal viewing angle. During driving, you can adjust this car cell phone holder according to your front passenger seat to avoid obstructing the sight and ensure driving stability and safety
[Super Stable & Upgraded Vent Clip] In terms of the stability of mobile phone holder for car, Humixx is based on precise investigations of 1000+ users. This cell phone car holder‘s clip adopts the 2021 latest improved [twist-lock] triangle stable mode vent clip [Won't broken & Super Stable], and built-in metal that on bumpy roads, braking or driving can be firm enough to hold at the air vent. In addition, the silicone pad of vent clip can also protect your car from damage
[All-Around Protection & User service] Say goodbye to the easy-scratched plastic panel phone holder. Humixx smartphone mount for car uses an innovative shock-proof texture made of PU material. And car mobile phone holder is also equipped with a thick layer of silicone. The comprehensive protection design makes leaves zero scratches on mobile phones. Moreover, whenever you need us, Humixx employees will always be here and handle all problems for you